DeLaval SCB3 - 4 Cleaning the Brush Cylinder; 5 Replacing the Brush Cylinder

No 2 Cleaning the brush cylinder
Special tool:
n
High-pressure cleaner
1. Remove the brush cylinder from the motor
drive before cleaning.
2. Clean the cylinder using a high pressure
cleaner or any similar device.
Note! The motor unit is IP65 protected. It
will not withstand high pressure cleaning.
No 3 Replacing the brush cylinder
Frequency -
Max. interval Every second month
Estimated time: -
Service type:
215123
Fig. 13: The brush cylinder.
Frequency -
Max. interval Yearly
Estimated time: -
Service type:
DeLaval swinging cow brush SCB3
Operator's maintenance
© DeLaval 2016.
2016-07-19, Version 5 22 (26) 84948801