DeLaval VMS 2012 Series - Additional maintenance; Changing hoses

6. Reassemble the container. Note that the
cylindrical cones (B) must face each other
and be properly inserted in the clip (A).
2 Additional maintenance
2.1 Changing hoses
A Silicone hose on the tube wheel
B The other two hoses
The three hoses (A and B) must be changed if
they have been deteriorated or if they not can be
cleaned properly. Due to the complicated opera-
tion, only the hose changing on the tube wheel
has been described.
B
A
210238
A Clip
B Cylindrical cone or container lid
B
A
210239
Milk sampler (VMS 2012)
Operators maintenance
© DeLaval 2012.
2012-01-10, Version 1 13 (18) 86352801