DeLaval VMS 2012 Series User Manual

2.1 Connecting the milk sampler
1. Stop the cow traffic through the milking sta-
tion. Milking must not take place when the
steps below are in progress.
2. Place the milk sampler in front of the milk-
ing station on an even surface.
3. Shut off the vacuum to the receiver by pull-
ing off the hose to VV401.
4. Attach the milk hose to the milk pump con-
nection on the milk pump.
5. Connect the electrical cable to the ALCOM
bus connector (B) on the control box (A).
219521
B
A
210228
A Control box
B ALCOM bus connector
Milk sampler (VMS 2012)
Operation
© DeLaval 2012.
2012-01-10, Version 1 6 (18) 86352801

DeLaval VMS 2012 Series Specifications

General

Brand	DeLaval
Model	VMS 2012 Series
Category	Farm Equipment
Language	English