DeLaval VMS 2012 Series User Manual

1. Press the VMS Menu button in the top right
corner to display the VMS menu.
2. Press the Milk Sampler button.
3. Press the Start button to display the Milk
sampler window.
4. Select a sample bottle by typing the bottle's
number on the keypad. The illustration
shows the first bottle for configuration (A) in
the VC configuration.
Note! The first bottle is located differently
depending on the configuration in the VC
configuration.
n For normal sampling type one (1) for
the first bottle.
The first bottle (1) is located differently
depending on the configuration in the
management software (VC configura-
tion), see above.
n For continuous sampling, when the
sampling sequence will continue with a
new rack, use the coming number after
the last bottle number of the previous
rack. In other words, if the sample tray
has contained 130 bottles in the first
place, it is possible to continue the
sampling sequence by typing the bottle
number “131”.
Use the Cancel button when typing the
wrong number.
5. Press Ok
6. Press the Start button to start the sampling.
210230
A
210231
Milk sampler (VMS 2012)
Operation
© DeLaval 2012.
2012-01-10, Version 1 9 (18) 86352801

DeLaval VMS 2012 Series Specifications

General

Brand	DeLaval
Model	VMS 2012 Series
Category	Farm Equipment
Language	English