Delfi PTS ii - Page 40

OPERATING INSTRUCTIONS
38 OPERATING INSTRUCTIONS
2
Conditions
Status
Indicator Light
Auditory
Priority Tone
Remarks and Appropriate
Actions
Power switch was activated with cuff
not deflated
Flashing Yellow
Medium
• Cuff pressure greater than
zero when ON/STANDBY
button pressed. The system
assumes that a procedure is
in progress and prevents
activation of STANDBY
mode
• Deflate the cuff (Refer to
Section 7 of Operation
under Section 2 Operating
Instructions), then press
ON/STANDBY button to set
the unit to STANDBY
Cuff not fully deflated as expected
Flashing Red
High
• The unit has detected
pressure in the cuff greater
than 5 mmHg, 25 seconds
after the cuff has been
deflated
• Disconnect hose from cuff
to exhaust pressure