28 Getting Started Guide
Agency compliance
The N1108T-ON, N1108P-ON, N1108EP-ON, N1124T-ON, N1124P-ON,
N1148T-ON, and N1148P-ON switches comply with the following safety and
agency requirements:
European Union EMC directive conformance
statement
This product is in conformity with the protection requirements of EU
Council Directive 2004/30/EC on the approximation of the laws of the
Member States relating to electromagnetic compatibility. Dell EMC cannot
accept responsibility for any failure to satisfy the protection requirements
resulting from a non-recommended modification of this product, including
the fitting of non-Dell EMC option cards.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 32/CISPR34 and
EN55032 / EN55034. The limits for Class A equipment were derived for
commercial and industrial environments to provide reasonable protection
against interference with licensed communication equipment.
WARNING:
This is a Class A product. In a domestic environment, this device may cause
radio interference, in which case, you may be required to take adequate
measures.
European Community Contact:
Dell EMC, EMEA - Central
Dahlienweg 19
66265 Heusweiler
Germany
Tel: +49 172 6802630
Email: EMEA Central Sales
India certification of compliance
The product conforms to the relevant Essential Requirements of
Telecommunication Engineering Centre (TEC) regulations.
2CSN11XX-QSG100-EMEA2-SAB.book Page 28 Friday, June 7, 2019 10:57 AM
To Next Page
Loading...
