Item Value
l
IP address mask that identifies the range of IP
addresses in the subnet where storage system is
connected.
Gateway:
l
Default gateway IP address of the storage
system management interface.
Prefix Length (IPv6 only):
l
The number of significant bits in the address
that will be used for routing purposes.
Unisphere
Enter the following information to initially log into Unisphere:
Item Value
Unisphere login information:
l
When logging into Unisphere for the first time,
use the default system account user name and
password
l
User Name: admin
l
Password: Password123#
Initial Configuration Wizard
The Initial Configuration Wizard walks you through the initial set up of Unisphere and
prepares the system for use. The first time the wizard launches, you will need to
access the End User License Agreement (EULA) and install Unisphere licenses. Use
the following list of screens and related actions as a guide to the initial configuration
process.
Screen Name
Action
Copyright Accept the EULA.
Unisphere Password Set the Unisphere admin and service passwords
Unisphere Licenses Obtain your Unisphere license file online and upload your
license file.
DNS servers (Manual configuration) Enter the network name or IP address
of one or more DNS servers.
A DNS server is required for EMC Secure Remote Services
(ESRS).
NTP Servers Enter the network name or IP address of one or more NTP
(Network Time Protocol) servers.
Configuration Worksheet
Configuration worksheet 69
To Next Page
Loading...
Need help?
General
