Before you begin
Procedure
1. Set up a product support account.
If you do not already have a product support account, go to https://
support.emc.com/products/39949 to set one up. You will need a support
account to access the latest troubleshooting information, online chat,
installation and maintenance videos, utilities and wizards.
2. Complete the
Configuration Worksheet
.
The
Configuration Worksheet
is available for download from https://
support.emc.com/products/39949. Configuration worksheet information is also
included in Configuration Worksheet on page 67.
Installation workflow including optional DAEs
Use the following documents and software and sequence of actions as a guide to
install the storage system:
1. Use the
Quick Start Guide
or this guide and the
Unity Hardware Information Guide
to:
a. Prepare the site for installation.
b. Unpack the storage system.
c. Rack and install the storage system.
d. Cable the system components.
e. Power up the system components.
f. Use the Connection Utility (CU) to discover and configure the system
management IP address for network management.
g. Launch a browser, log in to the system, and follow the Unisphere Initial
Configuration Wizard tasks to complete the initial system configuration.
2. Use Unisphere to:
a. Complete the Initial Configuration Wizard tasks:
l
Accept License Agreement and Configure User Credentials
l
Install License File
l
Configure Network Services (DNS/NTP)
l
Configure FAST Cache and Pools (optional)
l
Configure Alerts (optional)
l
Configure Support Credentials, Customer Contact Information, and EMC
Secure Remote Services (recommended)
l
Configure iSCSI Interfaces (optional)
l
Set up a NAS Server (optional)
b. Enable SSH under Service > Service Tasks (recommended for remote
support)
Prepare your system
8 Unity 300/300F, Unity 350F, Unity 380/380F, Unity 400/400F, Unity 450F, Unity 500/500F, Unity 600/600F
and Unity 650F Installation Guide
To Next Page
Loading...
Need help?
General