Dell 1908WFP - Removing the Stand

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1908WFP/en/ug/setup.htm[10/31/2012 11:33:48 AM]
NOTE: Do not use with any device other than Dell Soundbar.
NOTICE: Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only.
Removing the Stand
NOTICE: After placing the monitor panel on soft cloth or cushion, complete the following steps to remove the stand.
1. Rotate the stand to allow access to the stand release button.
2. Press the Stand release button and lift up the Stand and away from the monitor .
Back to Contents Page