About Your Monitor: Dell 1908WFP For Dell Flat Panel Monitor User'sGuide
file:///T|/htdocs/monitors/1908WFP/en/ug/about.htm[10/31/2012 11:33:23 AM]
Temperature:
Operating 5° to 35°C (41° to 95°F)
Non operating Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
Humidity:
Operating 10% to 80% (noncondensing@5 to 35°C)
Non operating Storage: 5% to 90% (noncondensing@-20° to 60°C)
Shipping: 5% to 90% (noncondensing@-20° to 60°C)
Altitude:
Operating 3,657.6 m (12,000 ft) max
Non operating 12,192 m (40,000 ft) max
Thermal dissipation 256.08 BTU/hour (maximum)
119.50 BTU/hour (typical)
Maintenance Guidelines
Cleaning Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as darker-colored monitor may scratch and show white scuff marks more than lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page
To Next Page
Loading...
