44 Basic Operations
www.dell.com | support.dell.com
2 Click OK to save the settings and return to the Setup dialog box. Click X or press
<Escape>
to return to the Main dialog box.
3 Click Commands. The Commands dialog box displays.
4 Click the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable
Confirm/Deny dialog box displays.
5 Click OK to enable the broadcast. Click X or press <Escape> to cancel and return to the
Commands dialog box.
6 If broadcasting is enabled, type the information and/or perform the mouse movements
that you would like to broadcast from the user station. Only devices in the list are
accessible.
NOTE: Any other user is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.
To Next Page
Loading...
