Appendix A: FLASH Upgrades 47
Figure A-1. Download Dialog Box
4
In the TFTP IP field, type the IP address of the TFTP server where the appliance firmware
FLASH file is located.
5 In the Filename field, type the filename of the firmware FLASH file.
6 Click Download. The firmware upgrade proceeds.
7 Once the firmware upgrade has completed, the Upgrade dialog box is displayed.
Upgrading the SIP module firmware
The SIP modules can be upgraded individually or simultaneously.
To simultaneously upgrade multiple SIP modules:
1 Press <Print Screen>. The Main dialog box displays.
2 Click Commands - SIP Status. The SIP Status dialog box displays.
NOTE: When the Enable SIP Autoupdate option is enabled in the SIP Status dialog box, SIP firmware is
automatically upgraded when the appliance firmware is upgraded or when a new SIP is discovered by
the appliance after an appliance firmware upgrade. SIPs that have already been discovered but which
are not attached to the appliance during the appliance firmware upgrade must be upgraded manually.
To Next Page
Loading...
