Dell 2408WFP - Setting the Optimal Resolution



See Solving Problems for more information.
Setting the Optimal Resolution
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1920 x 1200.
4. Click OK.
If you do not see 1920 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell desktop or portable computer:
¡ Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡ Go to the support site for your computer and download the latest graphic drivers.
¡ Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (Optional)
TheDellSoundbarisastereotwochannelsystemadaptabletomountonDellflatpaneldisplays.The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
or
or
or
If either VGA, DVI-D, HDMI or DisplayPort input is selected and all VGA, DVI-
D, HDMI and DisplayPort cables are not connected, a floating dialog box as shown below appears.
or
or
or

NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP/PBP
submenu to bring back the PIP
NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-
Sub or DVI) and 1 Video Source (Composite or S
functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.