Dell 2709W - Page 25




PIP Settings



PIP Mode
When PIP/PBP
activated
PIP Source
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF(mainsourceisVGA/DVI-Dinput)
PIP/PBP submenu when PIP/PBP ON(mainsourceisVGA/DVI-Dinput)

NOTE: When using DVI source, the contrast adjustment is not available.
There are two modes: Picture in Picture (PIP) and Picture by Picture (PBP)
Use and tobrowseand to select "Off", "PIP" or "PBP".
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/Composite/Component)