Dell 2709W - OSD Warning Messages


OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following message :
or
or
or
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications
fortheHorizontalandVerticalfrequency
ranges addressable by this monitor. Recommended mode is 1920 X 1200.

WhenmonitorentersPowerSavemode,thefollowingmessageappears:
or
or
Activate the computer and wake up the monitor to gain access to the OSD


If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D/HDMI/DisplayPort input
or