Dell 3008WFP - Connecting the Monitor

Back to Contents Page

Setting Up the Monitor
Dell™3008WFPFlatPanelMonitorUser'sGuide
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Stand
Connecting Your Monitor
To connect your monitor to the computer perform the following steps/instructions:
l Turnoffyourcomputeranddisconnectthepowercable.
l Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer.Donotusebothcablesonthesamecomputer. Use both the cables only when they are connected to two different computers with
appropriatevideosystems.
Connecting the white DVI cable
Connecting the blue VGA cable

Connecting the Displayport cable
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.