Install output bin <x> or cancel print job
Try one or more of the following:
• Install the specified bin:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Install the specified bin.
4 Connect the power cord to a properly grounded outlet.
5 Restart the printer.
• Cancel the current job.
Install duplex unit or cancel print job
Try one or more of the following:
• Install the duplex unit:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Install the duplex unit.
4 Connect the power cord to a properly grounded outlet.
5 Restart the printer.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Install envelope feeder or cancel print job
Try one or more of the following:
• Install the envelope feeder:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Install the envelope feeder.
4 Connect the power cord to a properly grounded outlet.
5 Restart the printer.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Install Tray <x> or Cancel Print Job
The printer is requesting that a specified device be installed so it can print a job.
Try one or more of the following:
• Insert the specified tray.
• Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Troubleshooting
158
To Next Page
Loading...
