3 Unlock the length guide, squeeze the length guide tab inward as shown, and slide the guide to the correct position
for the paper size being loaded.
3
1
2
Notes:
• Use the size indicators on the bottom of the tray to help position the guides.
• For standard paper sizes, lock the length guide.
4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
5 Load the paper stack:
• Print side facedown for single-sided printing
• Print side faceup for duplex printing
Note: Paper must be loaded differently in the trays if an optional Staple Finisher is installed.
Without an optional Staple Finisher With an optional Staple Finisher
LETTER
HEAD
Single-sided printing
L
E
T
T
E
R
H
E
A
D
Single-sided printing
Loading paper and specialty media
55
To Next Page
Loading...
