Dell 5810 - Page 6

Page 6 of 15
Dave Pimm – Avid Technology – Dec 24th, 2014
Rev A
Embedded Intel network interface for ISIS connectivity:
For proper operation and connectivity of the Intel network interface with ISIS the following settings are required:
1. For the Intel NIC driver, under the performance settings, change the following parameters:
- Receive Buffers to 10 24
- Transmit Buffers to 1024
2. Disable the windows firewall.
C.) Required system BIOS settings for AVID environments:
Use latest version from Vendor website
Please Note: CPU Hyper-threading should be enabled in all configurations. It is currently enabled by
default by Dell for shipping 5810 systems
5810 Required system BIOS changes:
1. Verify CPU Processors are set to Hyper-Threading
Set 5810 Required system BIOS changes:
- During boot up press F2 at the Dell splash screen to invoke Set Up.
- Select the Performance tab
- Select Processor
- Select Hyper-Threading
- Verify setting is Enable
 If Hyper-Threading is set for Disable then it must be changed to Enable
D.) Nvidia Qualified Driver:
AVID Software
Version(s)
Nvidia GPU
Nvidia Driver Required
Media Composer
8.2.0 and later
7.0.4.1 and later**
K2200
340.84
NewsCutter
(11.x) 11.0.4.1 and later**
K2200
340.84
After installation of the AVID software the supported Nvidia driver can be found in the following directory:
Program Files / Avid / Utilities / Nvidia. The Nvidia driver, 340.84, is NOT included with the 7.0.4.1/11.0.4.1 patch.
You can find this Nvidia driver on the Avid Knowledge Base.