Dell Aurora R6 - Removing the Solid-State Drive; Prerequisites; Procedure

Removing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive
while the computer is in sleep or on state.
Prerequisites
1 Remove the left-side cover.
2 Follow the procedure from step 1 to step 4 in "Removing the power-supply
unit".
3 Remove the graphics card.
Procedure
1 Locate the solid-state drive slot on the system board. For more information,
see "
System-board components".
2 Remove the screw that secures the solid-state drive to the system board.
76