Dell B3460DN Mono Laser User Manual

Additional printer setup
Installing internal options
Notes:
• A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.
Available internal options
Memory cards
•
DDR3 DIMM
• Flash memory
– Fonts
– Firmware
• Forms Barcode
• Prescribe
• IPDS
• Printcryption
Accessing the controller board
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1 Open the controller board access door.
Additional printer setup 13

Dell B3460DN Mono Laser Specifications

General

Print Resolution	1200 x 1200 dpi
Input Capacity	650 sheets
Output Capacity	250 sheets
Processor Speed	800 MHz
RAM	256 MB
Print Technology	Laser
Monthly Duty Cycle	150000 pages
Standard Connectivity	USB 2.0
Operating System Compatibility	Windows, Linux, Mac OS
Warranty	1 year
Print Speed	Up to 50 ppm