Dell B3460DN Mono Laser User Manual

Action Yes No
Step 6
a Redistribute the toner in the imaging unit.
1 Remove the toner cartridge, and then the imaging unit.
2 Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3 Install the imaging unit, and then the cartridge.
b Resend the print job.
Is the print still too light?
Go to step 7. The problem is solved.
Step 7
Replace the imaging unit, and then resend the print job.
Is the print still too light?
Contact
technical
support.
The problem is solved.
Printer is printing blank pages
Action Yes No
Step 1
a Check if there is packing material left on the imaging unit.
1 Remove the toner cartridge, and then the imaging unit.
2 Check if the packing material is properly removed from the imaging
unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3 Reinstall the imaging unit, and then the cartridge.
b Resend the print job.
Is the printer still printing blank pages?
Go to step 2. The problem is solved.
Troubleshooting 148

Dell B3460DN Mono Laser Specifications

General

Print Resolution	1200 x 1200 dpi
Input Capacity	650 sheets
Output Capacity	250 sheets
Processor Speed	800 MHz
RAM	256 MB
Print Technology	Laser
Monthly Duty Cycle	150000 pages
Standard Connectivity	USB 2.0
Operating System Compatibility	Windows, Linux, Mac OS
Warranty	1 year
Print Speed	Up to 50 ppm