Dell B3460DN Mono Laser User Manual

Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are supported
by the printer.
1 From the printer control panel, navigate to:
Menus > Reports > Print Fonts
2 Select PCL Fonts or PostScript Fonts.
b Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2. Select a font that is
supported by the
printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved. Contact
technical
support.
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions
for the paper loaded.
b Resend the print job.
Is the page or image clipped?
Go to step 2. The problem is solved.
Step 2
From the printer control panel, set the paper size and type in the Paper
menu to match the paper loaded in the tray.
Do the paper size and type match the paper loaded in the tray?
Go to step 3. Do one or more of the
following:
• Specify the paper
size from the tray
settings to match
the paper loaded in
the tray.
• Change the paper
loaded in the tray
to match the paper
size specified in the
tray settings.
Troubleshooting 139

Dell B3460DN Mono Laser Specifications

General

Print Resolution	1200 x 1200 dpi
Input Capacity	650 sheets
Output Capacity	250 sheets
Processor Speed	800 MHz
RAM	256 MB
Print Technology	Laser
Monthly Duty Cycle	150000 pages
Standard Connectivity	USB 2.0
Operating System Compatibility	Windows, Linux, Mac OS
Warranty	1 year
Print Speed	Up to 50 ppm