Dell B3460DN Mono Laser User Manual

Repeating defects appear on prints
Action Yes No
Step 1
Measure the distance between the defects.
Check for a distance between the defects that equals:
• 97 mm (3.82 in.)
• 47 mm (1.85 in.)
• 38 mm (1.5 in.)
Is the distance between defects equal to one of the listed measurements?
Go to step 2.
1 Check if the
distance between
the defects equal
to 80 mm (3.15 in.)
2 Take note of the
distance, and then
contact
technical
support or your
Dell printer dealer.
Step 2
Replace the imaging unit, and then resend the print job.
Do the repeating defects still appear?
Contact
technical
support or your Dell
printer dealer.
The problem is solved.
Print is too dark
Action Yes No
Step 1
a From the Quality menu on the printer control panel, reduce the toner
darkness.
Note: 8 is the factory default setting.
b Resend the print job.
Is the print still too dark?
Go to step 2. The problem is solved.
Troubleshooting 145

Dell B3460DN Mono Laser Specifications

General

Print Resolution	1200 x 1200 dpi
Input Capacity	650 sheets
Output Capacity	250 sheets
Processor Speed	800 MHz
RAM	256 MB
Print Technology	Laser
Monthly Duty Cycle	150000 pages
Standard Connectivity	USB 2.0
Operating System Compatibility	Windows, Linux, Mac OS
Warranty	1 year
Print Speed	Up to 50 ppm