Use To
Paper Sizes
US
Metric
Specify the default system of measurement for paper sizes.
Notes:
• US is the factory default setting.
• The initial setting is determined by your country or region
selection in the initial setup wizard.
• Changing this also changes the default setting for each input
source in the Paper Size/Type menu.
Scan to PC Port Range
[port range]
Specify a valid port range for printers behind a port blocking
firewall. The valid ports are specified by two sets of numbers
separated by a semicolon.
Note: “9751:12000” is the factory default setting.
Displayed Information
Left side
Right side
Custom Text [x]
Specify what is displayed on the upper left and right corners of the
home screen.
For the Left side and Right side menus, select from the following
options:
None
IP Address
Hostname
Contact Name
Location
Date/Time
mDNS/DDNS Service Name
Zero Configuration Name
Custom Text [x]
Model Name
Notes:
• IP Address is the factory default setting for “Left side.”
• Date/Time is the factory default setting for “Right side.”
Understanding the printer menus 162
To Next Page
Loading...
Need help?
General
