NOTE: Make sure the cooling shroud is placed such that the 'REAR' mark on the cooling shroud is towards the rear
side of the system.
3. Install the cover.
4. Follow the procedure in After Working Inside Your Computer.
Identifier
GUID-14C0D031-FA0A-4269-B841-B2EBD0633192
Status Released
Expansion card
GUID-14C0D031-FA0A-4269-B841-B2EBD0633192
Identifier
GUID-4F12F1C3-22A1-4861-AEBA-F624D63B8F75
Status Released
Removing the PCIe X1 expansion card-optional
GUID-4F12F1C3-22A1-4861-AEBA-F624D63B8F75
1. Follow the procedure in Before working inside your computer.
2. Remove the cover.
3. Perform the following steps to remove the expansion card:
20
Removing and installing components
To Next Page
Loading...
