Dell D13S - Power Supply Unit; Removing the Power Supply Unit PSU

5. Install the:
a) drive cage
b) 3.5-inch hard drive chassis
c) front bezel
d) cover
6. Follow the procedure in After working inside your computer.
Identifier
GUID-F8164337-4D5F-47F7-AEB2-E426D33BEB4B
Status Released
Power supply unit
GUID-F8164337-4D5F-47F7-AEB2-E426D33BEB4B
Identifier
GUID-866F64E2-6B13-4A23-B28D-579386A20F67
Status Released
Removing the power supply unit PSU
GUID-866F64E2-6B13-4A23-B28D-579386A20F67
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) cover
b) front bezel
c) cooling shroud
d) 3.5-inch hard drive chassis
e) drive cage
3. Perform the following steps to remove the power supply unit (PSU) from the computer:
a) Disconnect the PSU cables from the connectors on the system board [1, 3].
b) Unroute the PSU cables from the metal clips [2,,4].
56
Removing and installing components