6. Install the:
a) heat sink assembly
b) WLAN card
c) expansion card (optional)
d) M.2 SATA SSD
e) drive cage
f) 3.5-inch hard drive chassis
g) cooling shroud
h) memory module
i) front bezel
j) cover
7. Follow the procedures in After Working Inside Your Computer.
Identifier
GUID-2FA9BA72-E6AB-49CE-BFF3-9501CCC4FD18
Status Released
TPM 2.0 installation
GUID-2FA9BA72-E6AB-49CE-BFF3-9501CCC4FD18
When you replace the system board for Windows 10 systems, the TPM 2.0 utility needs to be downloaded from Dell.com/support and
updated. The act of updating the TPM 2.0 is the customer's responsibility. Failure to update to TPM 2.0 does not cause any major
functionality issues with the system. Without TPM 2.0, some of the new, advanced security features of TPM 2.0 cannot be enabled
through Windows 10. At that point the customer can still update the system to TPM 2.0. While DSP technicians are encouraged to help
customers update to TPM 2.0 where possible, the risks of unavailable internet connection and restrictions have been taken into account
and as such this approach is flagged as a best effort basis.
Identifier
GUID-2C2FBB0C-C12A-4642-85C3-E92581A7641E
Status Released
Installing Dell TPM Update Utility for Windows or DOS
GUID-2C2FBB0C-C12A-4642-85C3-E92581A7641E
76
Removing and installing components
To Next Page
Loading...
