Dell D13S - Heat Sink Assembly; Removing the Heat Sink Assembly

4. Install:
a) drive cage
b) 3.5-inch hard drive chassis
c) cooling shroud
d) front bezel
e) cover
5. Follow the procedure in After Working Inside Your Computer.
Identifier
GUID-ED545F68-B25E-4947-9311-B6FAC5952525
Status Released
Heat sink assembly
GUID-ED545F68-B25E-4947-9311-B6FAC5952525
Identifier
GUID-AAAF0340-E497-4D36-9AB9-2D03BD9AA8D5
Status Released
Removing the heat sink assembly
GUID-AAAF0340-E497-4D36-9AB9-2D03BD9AA8D5
1. Follow the procedure in Before working inside your computer.
46
Removing and installing components