a) Remove the three M2x2 screws that secure the bracket to the optical drive [1].
b) Slide the optical drive from the bracket [2].
Identifier GUID-8D368588-ECF8-404B-99FF-D12B1BC0860F
Status Released
Installing the optical drive
GUID-8D368588-ECF8-404B-99FF-D12B1BC0860F
1. Slide the optical drive into the drive bay until it snaps [1].
2. Tighten the three M2x2 screws to secure the optical drive to the bracket [2].
3. Install the:
a) drive cage
b) 3.5-inch hard drive chassis
c) cooling shroud
Removing and installing components
41
To Next Page
Loading...
