c) 3.5-inch hard drive chassis
3. Follow the steps to remove hard drive:
a) Remove the two 6-32xL3.6 screws that secure the hard drive to the bracket [1].
b) Slide and remove the hard drive from the bracket [2].
Identifier GUID-74A2D1C5-B615-4D6E-A23E-F2F4ECDC9558
Status Released
Installing the 3.5-inch hard drive into the hard drive bracket
GUID-74A2D1C5-B615-4D6E-A23E-F2F4ECDC9558
1. Slide the hard drive into the hard drive bracket [1].
2. Replace the two 6-32xL3.6 screws to secure the hard drive to the bracket [2].
3. Install:
a) 3.5-inch hard drive chassis
36
Removing and installing components
To Next Page
Loading...
