Table 6. System setup options—Storage menu
Storage
SATA Operation
SATA/NVMe Operation Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID. (Intel® Rapid
Restore Technology)
Storage Interface
Port Enablement Enables or disables the onboard drives.
Default: SATA-0 is ON
Default: SATA-1 is ON
Default: SATA-3 is ON
Default: M.2 PCIe SDD-0 is ON
SMART Reporting Enable or disable SMART Reporting during system startup.
Default: OFF
Drive Information Displays the information of various onboard drives.
Enable MediaCard Turn on or off all media cards, or enable or disable the media card in read-only
state.
By default, Secure Digital (SD) Card is selected.
Table 7. System setup options—Display menu
Display
Primary Display
Video Primary Display Set or change the primary video controller when multiple controllers are
available in the system.
By default, Auto is selected.
Full Screen Logo
Full Screen Logo Displays the full screen logo if the screen resolution matches the image of the
logo.
Default: OFF
Table 8. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Controls the onboard LAN controller.
By default, Enable with PXE is selected.
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
Default: ON
Bluetooth® Enables or disables the internal Bluetooth® device.
Default: ON
Enable UEFI Network Stack
Enable UEFI Network Stack Enable or disable UEFI Network Stack.
Default: ON
60 BIOS setup
To Next Page
Loading...
