Table 8. System setup options—Connection menu (continued)
Connection
HTTP(s) Boot Feature Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
HTTP(s) Boot Enables or disables HTTP(s) Boot Feature.
Default: ON
HTTP(s) Boot Modes Configure the HTTP(s) Boot Mode. Auto Mode will extract Boot URL from
the Dynamic Host Configuration Protocol (DHCP). Manual mode reads user-
provided Boot URL.
By default, Auto Mode is selected.
Table 9. System setup options—Power menu
Power
USB Wake Support
Enable USB Wake Support Enables USB devices like a mouse or keyboard to wake the system from
Standby, Hibernation, or Power Off state.
Default: ON
AC Behavior
AC Recovery Configures the system response when power is restored after an unexpected
loss of power.
Default: Power OFF is selected. System stays off after AC power is restored.
Active State Power Management
ASPM Configures the Active State Power Management (ASPM) level.
Default: Auto. There is handshaking between the device and PCI Express hub
to determine the best ASPM mode supported by the device.
Block Sleep
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
Deep Sleep Control
Deep Sleep Control Configures how aggressive the system is at conserving power while in
Shutdown (S5) or Hibernate (S4) mode.
Default: Enabled in S4 and S5
Intel® Speed Shift Technology
Intel® Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Turning on
this option allows the operating system to select the appropriate processor
performance automatically.
Default: ON
Table 10. System setup options—Security menu
Security
TPM 2.0 Security Enable or disable TPM 2.0 Security.
Default: ON
Attestation Enable Enable or disable Attestation.
Default: OFF
BIOS setup 61
To Next Page
Loading...
