To Next PageTo Next PageWhy is there no video on my Dell D2421H Monitor but the power LED is on?
If your Dell monitor's power LED is on but there's no video, try these steps: First, increase the brightness and contrast via the On-Screen Display (OSD). Second, perform a monitor self-test. Third, inspect the video cable connector for bent or broken pins. Finally, ensure the correct input source is selected in the Input Source select menu.
How to fix brightness problems on a Dell D2421H Monitor?
To resolve brightness issues on your Dell monitor: First, reset the monitor to its factory settings. Second, use the Auto Adjust feature via the OSD. Finally, manually adjust the brightness and contrast controls within the OSD.
What to do if my Dell monitor has no video and the power LED is off?
If your Dell monitor isn't displaying video and the power LED is off, check these items: Ensure the video cable connecting the monitor and computer is properly connected and secure. Verify the power outlet is functioning with other electrical equipment. Make sure the power button is fully depressed. Also, confirm the correct input source is selected using the Input Source select button.
How to troubleshoot intermittent problems with a Dell monitor?
To troubleshoot intermittent problems with your Dell monitor: First, ensure the video cable connecting the monitor to the computer is securely connected. Second, reset the monitor to its Factory Reset settings. Finally, perform the monitor's self-test feature check to see if the issue persists in self-test mode.
What to do if my Dell D2421H Monitor has missing color?
If your Dell monitor is displaying missing color: First, perform a monitor self-test. Second, ensure the video cable connecting the monitor to the computer is properly connected and secure. Third, check the video cable connector for bent or broken pins.
What to do if my Dell D2421H has wrong color?
If your Dell monitor is showing the wrong colors: Try changing the Color Vision Mode in the Color Adjust OSD to either Graphics or Video, depending on what you're viewing. You can also experiment with different User Color settings in the Color Adjust OSD. If Color Vision Mode is off, adjust the R/G/B values in the User Color OSD.
How to fix shaky or jittery video on a Dell D2421H Monitor?
To correct shaky or jittery video on your Dell monitor: First, perform Auto Adjust via the OSD. Second, adjust the Phase and Pixel Clock controls via the OSD. Third, reset the monitor to Factory Reset. Check for any environmental factors that might be causing interference. As a last resort, relocate the monitor to another room to test.
How to resolve geometric distortion on a Dell monitor?
To fix geometric distortion on your Dell monitor: Start by resetting the monitor to its factory defaults. Next, use the Auto Adjust function in the OSD. Then, fine-tune the display by adjusting the brightness and contrast controls, also found in the OSD.
How to fix poor focus on a Dell monitor?
To improve poor focus on your Dell monitor: Begin by performing Auto Adjust via the OSD. If that doesn't work, adjust the Phase and Pixel Clock controls, also through the OSD. Try eliminating any video extension cables. Reset the monitor to its Factory Reset settings. Lastly, ensure the video resolution is set to the correct aspect ratio (16:9).
General| Screen Size | 23.8 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 (typical) |
| Color Support | 16.7 million colors |
| VESA Mount | 100 x 100 mm |
| Response Time | 5 ms |
| Viewing Angle | 178° (horizontal), 178° (vertical) |
| Ports | HDMI, VGA |
