Dell Dimension 4600 Series - Removing the Computer Cover

Back to Contents Page

Removing the Computer Cover
Dell™Dimension™4600SeriesServiceManual


1. Follow the procedures in "Before You Begin."
2. Lay your computer on its side with the computer cover facing up.
3. If your computer cover has a cover latch, slide and hold the cover latch.
4. Grip the indents on the computer cover, and slide the computer cover toward the back of the computer

.

5. Place the computer cover on a level surface.
Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual or Product Information
Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.