Dell DL1000 - Viewing System Information for a Machine

Text Box Description
Display Name Enter a display name for the machine.
A name for this machine to be displayed in the Core Console. By default, this is
the host name of the machine. You can change the display name to something
more user-friendly if needed.
Host Name Enter a host name for the machine.
Port Enter a port number for the machine.
The Core uses the default port 8006 to communicate with this machine.
Encryption Key Edit the encryption key if necessary. Specifies whether encryption is applied to
the data for every volume on the machine that is stored in the repository.
Repository Select a repository for the recovery points. Displays the repository on the Core
in which to store the data from this machine.
NOTE: This setting can only be changed if there are no recovery points or
the previous repository is missing.
Viewing system information for a machine
The Core Console displays all the machines that are being protected .
To view system information for a machine:
1. In the left navigation area of the Core Console, under Protected Machines, select the machine to
view detailed system information.
2. Click the Tools tab.
The System Information tab displays include the following:
• Host Name
• OS Version
• OS Architecture
• Memory (Physical)
• Display Name
• Fully Qualified Domain Name
• Virtual Machine Type (if applicable)
Detailed information about the volumes contained on this machine includes:
• Name
• Device ID
• File System
• Capacity (including Raw, Formatted, and Used)
Other machine information displayed, includes:
• Processors
• Network adapters
• IP addresses associated with this machine
40