NOTE: Removing a source core results in the removal of all replicated machines that are protected
by that core.
Removing a protected machine from replication on the source Core
To remove a protected machine from replication on the source core:
1. From the source core, open the Core Console, and click the Replication tab.
2. Expand the Outgoing Replication section.
3. In the drop-down menu for the protected machine that you want to remove from replication, click
Delete.
4. In the Outgoing Replication dialog box, click Yes to confirm deletion.
Removing a protected machine on the target Core
To remove a protected machine on the target core:
1. On the target core, open the Core Console, and click the Replication tab.
2. Expand the Incoming Replication section.
3. In the drop-down menu for the protected machine that you want to remove from replication, click
Delete, and then select one of the following options.
Option Description
Relationship Only Removes the protected machine from replication but retains the replicated
recovery points.
With Recovery
Point
Removes the protected machine from replication and deletes all replicated
recovery points received from that machine.
Removing a target Core from replication
To remove a target core from replication:
1. On the source core, open the Core Console, and click to the Replication tab.
2. Under Outgoing Replication, click the drop-down menu next to the remote core that you want to
delete, and click
Delete.
3. In the Outgoing Replication dialog box, click Yes to confirm deletion.
Removing a source Core from replication
NOTE: Removing a source core results in the removal of all replicated agents protected by that
core.
To remove a source core from replication:
1. On the target core, open the Core Console, and click the Replication tab.
2. Under Incoming Replication, in the drop-down menu, click Delete, and then select one of the
following options.
90
To Next Page
Loading...
