Dell DL1000 - Replicating to a Core Managed by a Third Party; Replicating a New Agent

4. Click Yes to confirm the action.
The seed drive is removed. If there are no more seed drives that exist on the source core, then the
next time that you open the Replication tab, the Outstanding Seed Drive (#) link and Outstanding
seed drives section do not appear.
Replicating to a core managed by a third party
A third-party core is a target core that it managed and maintained by an MSP. Replicating to a core
managed by a third party does not require you to have access to the target core. After a customer
configures replication on the source core or cores, the MSP completes the configuration on the target
core.
NOTE: This configuration applies to hosted and cloud replication. The AppAssure Core must be
installed on all source core machines.
Replicating a new agent
When you add an AppAssure Agent for protection on a source core, AppAssure gives you the option to
replicate the new agent to an existing target core.
To replicate a new agent:
1. Navigate to the Core Console, and then click the Machines tab.
2. In the Actions drop-down menu, click Protect Machine.
3. In the Protect Machine dialog box, enter the information as described in the following table.
Text Box Description
Host Enter the host name or IP address of the machine that you want to protect.
Port Enter the port number the AppAssure Core uses to communicate with the
agent on the machine.
Username Enter the username used to connect to this machine. For example,
Administrator.
Password Enter the password used to connect to this machine.
4. Click Connect to connect to this machine.
5. Click Show Advanced Options, and edit the following settings as needed.
Text Box Description
Display Name Enter a name for the machine to be displayed in the Core Console.
Repository Select the repository on the AppAssure Core where the data from this machine
is stored.
Encryption Key Specify whether encryption is applied to the data for every volume on this
machine stored in the repository.
NOTE: The encryption settings for a repository are defined under the
Configuration tab in the Core Console.
Remote Core Specify the target core to which you want to replicate the agent.
86