Dell DL1000 - Page 80

To Next Page

To Previous Page

4. Verify that the Universally Unique Identifier (UUID) contains the new volumes by using either the

blkid command or the ll /dev/disk/by-uuid command.

5. Verify that /etc/fstab contains the correct UUIDs for the root and boot volumes.

6. Install Grand Unified Bootloader (GRUB) by using the following commands:

mount --bind /dev/ /mnt/dev

mount --bind /proc/ /mnt/proc

chroot/mnt/bin/bash

grub-install/dev/sda

7. Verify that the /boot/grub/grub.conf file contains the correct UUID for the root volume, or update it

as needed by using a text editor.

8. Remove the Live CD disk from the CD-ROM drive and restart the Linux machine.

Other manuals for Dell DL1000