Dell E1912H - Attaching the Stand

Back to Contents Page

Setting Up the Monitor
Dell™E1912H Monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand
Attaching the Dell Soundbar (Optional)

Attaching the Stand
1. Assemble the stand riser to stand base.
2. Attach the stand assembly to the monitor:
Connecting Your Monitor
NOTE: The stand base is detached when the monitor is shipped from the factory.
a.
Place the monitor stand base on a stable table top.
b.
Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
a.
Place the monitor on a soft cloth or cushion near the edge of desk.
b.
Align the stand assembly bracket to the monitor groove.
c.
Insert the bracket towards monitor until it locks in place.