Dell E198FP - Page 32

Back to Contents Page
l The OSD Lock is On. Press the menu button
for 15 seconds to unlock the OSD menu.
The monitor will not go into
power saving mode.
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No input signal "
will appear.
l Move mouse or hit any key on the
keyboardonthecomputeroractivate
videoplayer,thenaccesstheOSDtoset
both Audio/Video to " off " state.
No Input Signal when user
controls pressed
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No input signal "
will appear.
l Check the signal source Make sure the
Computer is not in power saving by moving
mouse or pressing any key on the
keyboard.
l Check whether the signal cable is plugged
inandseatedproperly.Re-plug the signal
cable if necessary.
l Re-boot the computer or video player.
Downloaded from ManualMonitor.com Manuals