Dell E198FP - Attaching the Stand; Organizing Your Cables

Back to Contents Page


Using Your Monitor Stand
Dell™E198FPFlatPanelMonitor
Attaching the Stand
Organizing Your Cables
Using the Tilt
RemovingtheStand

Attaching the Stand


1. Place the stand on a flat surface.
2. Fit the groove on the back of the monitor onto the two teeth of upper stand.
3. Lower the monitor so that the monitor mounting area snaps on/locks to stand.

Organizing Your Cables

NOTE: Stand is detached when the monitor is shipped from the factory.
Downloaded from ManualMonitor.com Manuals