6 │ Setting Basic Display Functions
Setting Basic Display Functions
You can select Manual Mode that enables you to manually select a preset mode
or select Auto Mode that applies a preset mode based on the active application.
An on-screen message displays the current preset mode whenever it changes. The
selected monitor's Brightness and Contrast can also be directly adjusted from the
Basic tab.
E1920H/E2020H/E2220H/E2420H/E2420HS/E2720H/E2720HS
E1920H/E2020H/E2220H/E2420H/E2420HS/E2720H/E2720HS
NOTE: When multiple Dell monitors are connected, select “Enable display
matrix control” to apply brightness, contrast and color presets controls to
all monitors.
To Next Page
Loading...
