26 │ About your monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety instructions.
NOTE: Do not connect all cables to the monitor at the same time. It is
recommend to route the cables through the cable-management clip
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the VGA cable or HDMI cable or DP cable (purchased separately) from
your monitor to the computer.
Connecting the VGA/HDMI/DP Cable (purchased separately)
3. Connect the power cables from your computer and monitor into a wall outlet.
To Next Page
Loading...
