Figure 30. Installing the cooling fan cage
Next steps
1. If removed, Install the air shroud.
2. Follow the procedure listed in After working inside your system.
Removing the cooling fan cage board
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove the following components:
a. Air shroud
b. Cooling fan cage
c. Disconnect all cables from the fan board.
Steps
Loosen the four screws on the fan board and, lift up the fan board out of the system.
42
Installing and removing system components
To Next Page
Loading...
