Dell EMC VxFlex Ready Node R740xd - Physical Server Requirements; Supported Operating Systems; Vxflex os Gateway Server Requirements; Server Physical Requirements

Physical server requirements
Table 1 Server physical requirements
Component Requirement
Port specifications
l
The following TCP ports are not used by any other application, and are open in the local
firewall of the server:
n
MDM: 6611 and 9011
n
SDS: 7072 (for multiple SDS, ports 7073-7076)
n
VxFlex OS Gateway (includes REST Gateway, VxFlex OS Installer, and SNMP trap
sender): 80 and 443
n
Light Installation Agent (LIA): 9099
n
SDBG ports: MDM 25620, SDS 25640, Multiple SDS 25641-25644 (not 25640).
These ports are used by VxFlex OS internal debugging tools to extract live information
from the system for debugging purposes.
l
The following UDP port is open in the local firewall of the server:
n
SNMP traps: 162
Note
You can change the default ports. For more information, see “Changing default ports” in the
VxFlex OS Deployment Guide .
Supported operating systems and OS requirements
The following is a list of supported operating systems and additional OS requirements
for this version of VxFlex OS on VxFlex Ready Node servers.
For the most updated list, see the Dell EMC Simple Support Matrix (ESSM) at
https://elabnavigator.emc.com/eln/elnhome.
Table 2
ESXi
Component Requirement
Supported OS versions ESXi 6.7 U2 and earlier
ESXi 6.5 EP13 and earlier
Managed by vCenter 6.7
Additional requirements For vCenter v6.7, PowerCLI v6.5 must be used.
Connecting to a vCenter enables you to add hosts to a VcDatacenter folder.
Table 3
Windows, except Core systems (see note)
Component Requirement
Supported OS versions 2016 + Hyper-V, 2019 + Hyper-V (GUI, SDC, and LIA)
Including the Visual C++ redistributable 2010 package,
64-bit
Introduction
Physical server requirements 13