Dell EMC VxFlex Ready Node R740xd - System Requirements; Driver Support; Rebuild the M.2 Cards as a RAID Device

b. Check the log contents for errors:
less /bundleapplicationlogs/apply_components.log
For more information, see Troubleshooting the Hardware ISO on page 75 .
c. Press q to exit the log viewer, and then Alt+F1 to access the original console
screen.
11. Reboot the VxFlex Ready Node server and allow the update and configuration
jobs to complete. Power-cycle the server using the appropriate Power menu
option.
12. For each VxFlex Ready Node server, after the updates are finalized, clear the
iDRAC job queue using the iDRAC GUI:
a. From your Internet browser, go to https:// <iDRAC_IP_address> .
b. In the DELL Console Login window, type these credentials:
l
username: root
l
password: Scaleio123 (for Dell-supplied nodes) or password (for EMC-
supplied nodes)
c. Click Login.
d. In the iDRAC GUI navigation pane, select the Maintenance tab, and then
select the Job Queue tab.
e. Ensure that all jobs have completed successfully. Any job failures may
require re-running the bootable ISO, or further troubleshooting.
f. Select the checkbox for all of items in the Job Queue list, and then click
Delete.
13. Continue with OS installation and configuration, VxFlex OS deployment, and
other required tasks.
Configuring the Hardware
26 Operating System Installation and Configuration Guide - ESXi Servers