2–1
2 Maintaining Disk Drives
The array includes up to 16 hot-swappable disk drives, either Serial Attached
SCSI (SAS) or Serial ATA (SATA). Disk drive maintenance topics apply to both
SAS and SATA disk drives.
Removing the Bezel
To access the disk drives, you must remove the bezel.
The bezel comes with a lock, which helps protect the disk drives from being
tampered with or accidentally removed.
To unlock and remove the bezel:
1. Insert the bezel key and turn it clockwise to unlock the bezel. See Figure 2-1.
Figure 2-1: Unlocking the Bezel
2. Push the bezel release latch up to disengage the bezel from the chassis. See
Figure 2-2.
To Next Page
Loading...
