Installing System Components 49
Front Bezel (Optional)
Removing the Front Bezel
1
Using the system key, unlock the front bezel (if locked).
2
Lift up the release latch next to the keylock.
3
Rotate the left end of the bezel away from the front panel.
4
Unhook the right end of the bezel and pull the bezel away from
the system.
Figure 3-2. Removing and Installing the Front Bezel
Installing the Front Bezel
1
Hook the right end of the bezel onto the chassis.
2
Fit the free end of the bezel onto the system.
3
Secure the bezel with the keylock. See Figure 3-2.
1 release latch 2 keylock
3 hinge tab 4 front bezel
book.book Page 49 Monday, March 7, 2011 2:24 PM
To Next Page
Loading...
