Installing System Components 51
Figure 3-3. Opening and Closing the System
Closing the System
1
Align the cover with the left and right edges of the system and offset it
slightly towards the back of the system, so that the pins on the inner edge
of the cover are aligned with the chassis hooks. See Figure 3-3.
2
Slide the cover toward the front of the chassis till it locks in position.
3
Rotate the latch release lock in a clockwise direction to secure the cover.
1 latch release lock 2 indent
book.book Page 51 Monday, March 7, 2011 2:24 PM
To Next Page
Loading...
